E10 offers the option of selecting 5 different B cycles and, after entering a password, 1 S and N cycle. In addition to cycles, tests can also be programmed to optimise the use of time.
Thanks to the USB Ethernet connection (both standard), all cycle data can be transferred and conveniently managed on a PC via the free E-Data software, while the WiFi (standard) enables full digital traceability. It is also possible to install 3 different types of optional printers, at any time, for printing receipts or thermal labels containing data or barcodes.
The control systems and advanced functionalities common to all Euronda Pro System autoclaves guarantee safe processes and results over time: the Inspection System allows easy and frequent cleaning; the Dirt Control System separates clean and dirty water flows, draining the dirt from the hydraulic circuit; the conductivity meter constantly monitors water quality; while the air-water separator optimizes the pump operation.
Sterilization cycles and test programs
E10 offers the possibility of performing B, N and S cycles in addition to test programs (Vacuum, Helix, Bowie and Dick). From the menu it is possible to select 3 type B cycles (121°, 134°, 134° Prion) and 2 fast cycles (134° fast, 134° Prion fast), in full compliance with EN 13060. Fast cycles allow sterilization of a small load (1 tray and a 0.6 Kg solid load) 30% faster than standard cycles.
It is also possible to perform N (N134) and S (S134) type cycles, which can be activated by a password.
Load capacity
For E10, the maximum load of bagged solids is 4.5 kg for the 18-litre version and 6 kg for the 24-litre version.
E10 offers up to 4 solutions to optimise the load to be sterilized according to different requirements: the standard tray holder with 5 trays, 2 optional tray holders for the 18-litre version and 3 optional tray holders for the 24-litre version.
E10 offers the option of selecting 5 different B cycles and, after entering a password, 1 S and N cycle. In addition to cycles, tests can also be programmed to optimise the use of time.
Thanks to the USB Ethernet connection (both standard), all cycle data can be transferred and conveniently managed on a PC via the free E-Data software, while the WiFi (standard) enables full digital traceability. It is also possible to install 3 different types of optional printers, at any time, for printing receipts or thermal labels containing data or barcodes.
The control systems and advanced functionalities common to all Euronda Pro System autoclaves guarantee safe processes and results over time: the Inspection System allows easy and frequent cleaning; the Dirt Control System separates clean and dirty water flows, draining the dirt from the hydraulic circuit; the conductivity meter constantly monitors water quality; while the air-water separator optimizes the pump operation.
Sterilization cycles and test programs
E10 offers the possibility of performing B, N and S cycles in addition to test programs (Vacuum, Helix, Bowie and Dick). From the menu it is possible to select 3 type B cycles (121°, 134°, 134° Prion) and 2 fast cycles (134° fast, 134° Prion fast), in full compliance with EN 13060. Fast cycles allow sterilization of a small load (1 tray and a 0.6 Kg solid load) 30% faster than standard cycles.
It is also possible to perform N (N134) and S (S134) type cycles, which can be activated by a password.
Load capacity
For E10, the maximum load of bagged solids is 4.5 kg for the 18-litre version and 6 kg for the 24-litre version.
E10 offers up to 4 solutions to optimise the load to be sterilized according to different requirements: the standard tray holder with 5 trays, 2 optional tray holders for the 18-litre version and 3 optional tray holders for the 24-litre version.
